Output Relay Settings; Text Settings - GE 469 Instruction Manual

CHAPTER 1: GETTING STARTED
1.3.5

Output Relay Settings

1.3.6

Text Settings

469 MOTOR MANAGEMENT RELAY – INSTRUCTION MANUAL
Output relays (Trip or Alarm) can be associated to the Auxiliary Relays 2 and 3. Each can be
selected individually, or in combination, in response to customer specific requirements,
which can be initiated by any protection element or function, whose
settings has them selected.
Select the
RELAYS
If an application requires the short circuit protection element to operate the Auxiliary
Output 3 relay,
Select this output relay by pressing the value key until the desired
combination appear in the display.
Press the
As before, confirmation of this action will momentarily flash on the
display.
Text settings have data values which are fixed in length but user-defined in character. They
may be composed of uppercase letters, lowercase letters, numerals, and a selection of
special characters. The editing and storing of a text value is accomplished using the
decimal [.], , and
VALUE ENTER
For example:
Move to message
1 FUNCTION
A".
The relay will display the following message:
Press the
The name of this user-defined input will be changed in this example
from the generic "General Sw. A" to something more descriptive.
If an application is to be using the relay as a station monitor, it is more informative to
rename this input "Station Monitor".
S5 CURRENT ELEM. SHORT CIRCUIT TRIP
settings message.
ASSIGN TRIP
RELAYS:
Trip
ASSIGN TRIP
RELAYS:
Trip & Auxiliary3
key to store this change into memory.
ENTER
NEW SETTINGS
HAS
BEEN STORED
keys.
S3 DIGITAL INPUTS
, and scrolling with the
VALUE
INPUT 1 FUNCTION:
General Sw. A
key to view the next settings,
MESSAGE
ASSIGN RELAYS
ASSIGN TRIP
ASSIGNABLE INPUT 1 INPUT
keys, select "General Sw.
.
SWITCH NAME
1–15