GE 469 Instruction Manual page 124

4–34
Select the File > Properties menu item and verify that the
corresponding file is fully compatible with the hardware and firmware
version of the target relay.
If the versions are not identical, see Upgrading Settings Files to a New
Revision on page 4–31 for details on changing the Settings file version.
Right-click on the selected file.
Select the Write Settings to Device item.
The EnerVista 469 Setup software will generate the following warning message, to remind
the user to remove the relay from service, before attempting to load settings into an in-
service relay.:
Select the target relay from the list of devices shown.
Click Send.
If there is an incompatibility, an error of the following type will occur.
If there are no incompatibilities between the target device and the Settings file, the data
will be transferred to the relay. An indication of the percentage completed will be shown in
the bottom of the main menu.
CHAPTER 4: INTERFACES
469 MOTOR MANAGEMENT RELAY – INSTRUCTION MANUAL