File Support; Using Settings Files - GE 469 Instruction Manual

CHAPTER 4: INTERFACES
4.4.3

File Support

4.4.4

Using Settings Files

469 MOTOR MANAGEMENT RELAY – INSTRUCTION MANUAL
Click on Cancel to exit from the keypad and retain the old value.
For settings requiring non-numerical pre-set values (e.g.
CONNECTION TYPE
within the settings value box to display a drop-down selection menu
arrow.
Click on the arrow to select the desired settings.
For settings requiring an alphanumeric text string (e.g. message scratchpad messages),
the value may be entered directly within the settings value box.
In the Settings / System Setup dialog box, click on Save to save the
values into the 469.
Click Yes to accept any changes.
Click No, and then Restore to retain previous values and exit.
Opening any EnerVista 469 Setup file will automatically launch the application or provide
focus to the already opened application. If the file is a Settings file (has a '469' extension)
which had been removed from the Settings List tree menu, it will be added back to the
Settings List tree.
New files will be automatically added to the tree, which is sorted alphabetically with
respect to Settings file names.
Overview
The EnerVista 469 Setup software interface supports three ways of handling changes to
relay settings:
• In off-line mode (relay disconnected) to create or edit relay Settings files for later
download to communicating relays.
• Directly modifying relay settings while connected to a communicating relay, then
saving the settings when complete.
• Creating/editing Settings files while connected to a communicating relay, then
saving them to the relay when complete.
above, in the Voltage Sensing tab), click anywhere
VT
4–23