GE 469 Instruction Manual page 120

Note
4–30
It is important to define the correct firmware version to ensure that settings not available
in a particular version are not downloaded into the relay
Select the Firmware Version for the new Settings File.
For future reference, enter some useful information in the Description
box to facilitate the identification of the device and the purpose of the
file.
To select a file name and path for the new file, click the button beside
the File Name box [...].
Select the file name and path to store the file, or select any displayed file
name to update an existing file.
All 469 Settings Files should have the extension '469' (for example,
'motor1.469').
Click the appropriate radio button (yes or no) to choose between Auto-
Config or manual creation of the Settings File.
Click OK to complete the process.
Once this step is completed, the new file, with a complete path, will be
added to the EnerVista 469 Setup software environment.
CHAPTER 4: INTERFACES
469 MOTOR MANAGEMENT RELAY – INSTRUCTION MANUAL