Install Windscreen On Microphone - HME Wireless 6000 Installation Instructions Manual

•
Insert the front end of the microphone into the foam-lined hole in the windscreen so the screw
holes on the windscreen flanges are aligned with the holes on the sides of the microphone
mounting bracket as shown in Figure E-6.
•
Place the two screws and washers through the holes on the windscreen and mounting bracket,
into the screw holes on the sides of the microphone unit as shown in Figure E-6. Use a standard
(slotted) screwdriver to tighten the screws in place.
Figure E-6. Install windscreen on microphone
42