Table of Contents
Advertisement
STATIM 7000 Operator's Manual
6. The Communication Port
Setting the Serial Port Bitrate to 9600
Serial Port Bitrate
1.
From the User Setup menu, use the
Bitrate menu and select it using the
2.
From the Serial Port Bitrate menu, use the
and press the
Setting the Printer user Character; (example: 134°C)
Printer User º Char
1.
From the User Setup menu, use the
char menu and select it using the
2.
From the Printer user ° char menu, using the
by one, and the
press the
Save and Exit
Save and Exit
A Save and Exit must be performed after the above settings are completed. If this is not done,
the information will revert to its prior settings.
1.
From the User Setup menu, use the
2.
Select it by pressing the
a sequence of messages. .
Step 2
Selecting the Time and Date
Time/Date
Note: Set the time and date according to section 3.7.
button to select and return to the User Setup menu.
button to increase that value by ten, enter the value 32 [0x20] and
button to accept and return to the User Setup menu.
button. The LCD will display time and date information and
96 .00
and
buttons to scroll to the Serial Port
button.
and
buttons to scroll down to 9600
32 [0x20]
and
buttons to scroll to the Printer user °
button.
button to increase the displayed value
and
buttons to scroll to Save and Exit.
HH:MM DD/MM/YYYY
30
6. The Communication Port
- Quick Links:
- Troubleshooting Problems
Hide quick links:
Advertisement
Table of Contents
