Instructions For Use; Using The Cassette - SciCan STATIM 7000 Operator's Manual

4. Instructions For Use

4. Instructions For Use

4.1 Using the Cassette

When removing the cassette after a cycle, exercise caution as the
cassette and contents may be hot and contain steam
• To open the cassette:
1. Push the carry handle into the open position.
2. Put your hands on either side of the
cassette handle.
3. Insert your forefingers in the slots and place
your thumbs on the thumb pads.
4. Press down with your thumbs and pull up with
your forefingers until the lid opens.
5. Raise the cassette lid and disengage from the
tray. Rest the lid on its outer surface.
• To close the cassette:
1. Align the hinge tab on the lid with the hinge slot
on the tray.
2. As you begin to close the lid, the hinge tab and
slot will engage.
3. Place the carry handle into the closed position.
• Inserting the cassette into the Statim 7000:
1. Hold the cassette handle in one hand and the carry
handle in the other.
2. Place the end of the cassette into the unit and drop
the carry handle into its closed position.
3. Gently push the cassette inward until you hear a
click sound.
Never push the cassette into the Statim with force as the interior
components could be damaged.
• STAT-DRI
Treatment of the interior surfaces of the cassette with the Stat-Dri drying agent, provided with
your unit, will enhance the drying process. (Replacement bottles are available from SciCan,
order number 2OZPLUS, 8OZPLUS, 8OZPLUST, 32OZPLUS).
11
STATIM 7000 Operator's Manual
closed
carry handle
open
cassette handle
Figure 5