Choosing The Correct Output - SciCan STATIM 7000 Operator's Manual

5. Maintenance
6. The Communication Port

6.2 Choosing the correct output

Follow the steps 1 - 2, below, before connection the Printer, Data Logger or USB Flash Drive/
SD Card
User Mode
Time/Date Setup
Language Setup
Unit ID Setup
Drying - Unwrapped
Drying - Wrapped
Drying - R&P
Drying - Extra
Water quality
Last Printout
RS232
End of Line CR/LF
Serial Port Bitrate
Printer User ° char
Steri. End buzzer
Air Filter Warning
Water Filter
Replace Filter
Save and Exit
Exit
STEP 1
Selecting the USB Flash/MSD Option
1. Access user menu (see section 3.4).
2. From the RS232 menu, use the
buttons to scroll down to the required setting
and press the
to the User Setup menu. The factory default
setting is N/A.
RS232
29
STATIM 7000 Operator's Manual
and
button to select and return
USB/Flash MSD
or
SERIAL PRINTER
or
N/A