Installing A Voltage Regulator Module; Removing A Termination Board - Intel MB440LX System Installation Manual

A
A Latch
B Terminator Latching Assembly
C Terminator Board

Installing a Voltage Regulator Module

See Figure 4-6.
1. Observe the warnings and cautions on page 3, "Safety Guidelines."
2. Remove the left side cover (page 80).
3. Being careful not to touch the components or connector on the voltage
regulator module, remove it from its protective wrapper and place it on
a nonconductive, static-free surface.
4. Record the module ID information (may be a date code) in your
equipment log.
5. Hold the module by its top edge or upper corners and firmly press it
into the connector (Figure 4-6) on the system board until the lock tabs
click into place.
M440LX Server System Product Guide
B
Figure 4-5. Removing a Termination Board
C
OM05773A
89