Installing The Readimanager Iam In The Mgc+ Unit; Inspecting The Mgc+ Readimanager Server; Contents Of The Mgc+ Readimanager Server Pre-Installed; Contents Of The Mgc+ Readimanager Server Upgrade - Polycom DOC2238A Hardware Installation Manual

Installing the ReadiManager IAM in the MGC+
Unit

Inspecting the MGC+ ReadiManager Server

This section is relevant only to MGC+ systems that are being upgraded to the
ReadiManager by installing the ReadiManager IAM blade.
The MGC+ ReadiManager Server can be shipped in two different ways:
The MGC+ ReadiManager Server pre-installed on the MGC+
•
The MGC+ ReadiManager Server Upgrade Package
•
You should inspect the box that it was shipped in and note if it was damaged
in any way. If the server itself shows damage, you should file a damage claim
with the carrier who delivered it.
Contents of the MGC+ ReadiManager Server pre-installed on the
MGC+
The ReadiManager Server and I/O are pre-installed on the MGC+ unit. The
documentation package provided includes:
ReadiManager Installation & Documentation CD
•
ReadiManager Getting Started Guide and MGC Manager manuals
•
Contents of the MGC+ ReadiManager Server Upgrade Package
The MGC+ ReadiManager Server Upgrade package should contain the
following:
ReadiManager Server blade (requires installation from the front of
•
MGC+)
Server I/O (requires installation from the rear of MGC+)
•
ReadiManager Installation & Documentation CD
•
ReadiManager Getting Started Guide and MGC Manager manuals
•
MGC+ Hardware and Installation Manual
2-11