Mgc+ Control Unit - Polycom DOC2238A Hardware Installation Manual

MGC+ Control Unit

Table 1-1: MGC+ Specifications
Power Consumption
AC Maximum Power
consumption
A new Control unit is located in Slot A of the front panel of the MGC+.
The Control Unit has the following features:
Support of both XPEK and pSOS Operating Systems (OS)
•
XPEK or pSOS swappable Operating Systems (OS)
•
MGC Manager Version 7.0x
•
External IDE Compact Flash
•
• 40 GB Hard Drive
USB port
•
CCOM, revision version 5
•
New Rear Access I/O
•
MGC+ Hardware and Installation Manual
MGC+50
AC Voltage - 10Amp
at 100 VAC, 5 Amp at
240 VAC protected by
a 15 Amp circuit
breaker.
MGC+100
AC Voltage - 15 Amp at
100 VAC and 7.5 Amp at
240 VAC protected by a 15
Amp circuit breaker.
1-7