Shutting Down The Mgc+ 50/100 - Polycom DOC2238A Hardware Installation Manual

Shutting Down the MGC+ 50/100

The serial number displayed in the Dongle Information dialog box
should match the serial number on the Dongle. If the numbers do not
match, do not proceed and contact support.
Use the following procedure for both the MGC+100 and the MGC+50 to turn
off the MGC+ 100/50:
1. Exit the MGC Manager application, as described in the MGC Manager
User's Guide.
2. Switch off the main power switch on the rear panel and disconnect the
power cord from the power source.
MGC+ Hardware and Installation Manual
5-21