Connecting Scopia ® Control To Scopia Desktop Server - Avaya Scopia XT Telepresence Deployment Manual

Configuring the XT Telepresence
Field
Password
6. Tap Connect.
7. Tap Continue to complete the setup.
8. Tap Enable Scopia Desktop Services to connect to a Scopia Desktop Server for more
functionality, and enter the information required. For more details, see
Control to Scopia Desktop Server
Otherwise, tap Disable Scopia Desktop Services.
9. Select Get started.
Related links
®
Setting Up Scopia
Connecting Scopia
About this task
If your organization's deployment includes Scopia Desktop Server, you can additionally connect it
®
with Scopia Control to provide the following additional features:
• Access the calendar of the physical meeting room, stored in Equinox Management as part of
scheduling resources.
• Place a call using the corporate directory, stored in Equinox Management.
• Moderate meetings hosted on the Equinox Media Server or Scopia Elite MCU when the paired
XT Series participates in the meeting, including muting, hiding video, managing video layouts
of the external MCU, locking a meeting or terminating meetings. The local built-in MCU is
inaccessible from Scopia
• Record or stream a meeting using the Content Center, when the paired XT Series participates
in the meeting and the Content Center is deployed as part of the Scopia Desktop Server.
• Use Avaya Scopia Content Slider functionality to review previously shared content without
interrupting the presenter.
®
Scopia Control uses its connection with the Scopia Desktop Server to access other Equinox
Solution components, like Equinox Management, Equinox Media Server, and Scopia Elite MCU.
The Scopia Desktop Server connection requires that you enter the server's name or IP address, and
any valid Scopia Desktop login. Scopia
of that login. It is solely used as a means of accessing the server. Nevertheless we recommend
creating a login specifically dedicated to Scopia
January 2017
on page 66.
Control on page 64
®
Control to Scopia Desktop Server
®
Control in this mode.
®
Control does not access the personal virtual room details
Avaya Scopia
Comments on this document? infodev@avaya.com
Description
Figure 54: Locating the IP address of the XT Series
endpoint on page 65).
Enter the password of the XT Series as defined inside the
endpoint for connecting Scopia
control of the device.
The default password is 1234. You can change it in the
endpoint itself by navigating to Configure > Advanced >
Utilities > Remote Access > Scopia
®
Control's use.
®
XT Telepresence Deployment Guide
®
Control as the remote
®
Control
Connecting Scopia
®
66