Animo Optivend Choco Service Enclosure page 21

Continuation
Service menu
2.6 Clear counter
2.7 Clear all cntrs
2.8 Descale/filter
2.8.0 Service moment
Water
quality
Very hard
Hard
Normal
Soft
Very soft
2.8.1 Service counter
2.8.2 Clear counter
2.9 Read sensors
2.9.0 Temperature
2.9.1 Level sensors
2.9.2 Drip tray sensor
01/2007 (rev. 6) V2.0
Here, the electronic counter for each separate recipe can be reset to
zero. The number of activated rinsing cycles can also be reset to zero.
After confirming this menu item, all electronic counters are reset to
zero.
When the set service moment has been reached, a * (star) appears in
the top right of the display, See also chapter 4. Service.
Hardness
°D °F mmol/l
18-30 32-55 3,2-5,3
12-18 22-32 2,2-3,2
1,4-2,2
8-12 15-22
0,7-1,4
4-8 7-15
0- 0,7
0-4 0-7
The number of drinks dispensed is counted here. This allows you to
check how long before the next regular maintenance session (descale
boiler or replace water filter).
When periodic maintenance has been conducted (descaling or
replacement of the filter), the service counter must be reset to zero.
The star (*) is displayed and then disappears.
Shows current boiler temperature.
Shows current boiler level status.
Shows current drip tray status.
mgCaCo3/l
321- 536
214-321
268-214
72-268
0-72
21
Service moment
after .... Cups
5000
8500
12.500*
20.500
0 = Off
service enclosure