Animo Optivend Choco Service Enclosure page 20

Continuation
Service menu
2.2 Settings
2.2.1 Machine on
2.2.2 Show clock
2.2.3 Language
2.2.4 Use beeper
2.2.5 Fan on time
2.3 Time
2.4 Switching times
2.5 Coin system
2.5.0 Free vend
2.5.1 G13 / MDB
2.5.1 Show credit
2.5.2 Coin channel 1 -
2.5.7 Coin channel 6
2.5.8 Single vend
2.5.9 Max.coin accep.
2.5.10 Point position
service enclosure
Is similar to the function of the stand-by button on the service panel.
Clock in the upper left corner of the display activated.
Language setting. The language will be English after loading defaults.
Beeper enable/disable.
Duration that the vapour ventilation remains switched on when the hot
water dosing valves close.
This item is similar to operator item 1.1.
This item is similar to operator item 1.2.
This item is the same as 1.1 and 2.0 of the operator menu.
From software V2.0; setting of G13 coin system or MBD*
protocol. ( * MDB connection is not standard on the PCB available)
Shows money inserted in the display.
Parameters below are only active when G13 coin system is set.
Setting of the coin value per channel. Respectively € 0.05 t/c 2.00
= free / TOKEN = coffee token.
> yes: additional coins inserted are not used for the following drink
> no: are used for the following drink.
Amounts greater than e.g. € 1.00 are rejected and returned through
the return slot of the coin mechanism. Always adjust on highest
product price which ist programmed.
The position where the decimal point must be in the amount.
20 01/2007 (rev. 6) V2.0