Audio - Polycom VSX Series Administrator's Manual

Audio

Symptom
No audio at your site
Problem
The far site is muted.
The volume may be turned
all the way down on the
monitor or external audio
system.
VSX 6000, VSX 6000A,
VSX 7000, VSX 7000s:
The midrange speaker and
subwoofer may be turned
off.
This happens if stereo is
enabled and is possible
even if you have not set up
the system to use stereo.
The far site's microphones
are not placed correctly.
The far site's microphone is
not connected or does not
have power.
Too many line errors.
Diagnostics and General Troubleshooting
Corrective action
Look for the far site Mute icon. Ask the far site to
unmute the microphone.
Note: The far site's microphone may be muted even
if you do not see a far site Mute icon.
Turn up the volume on the appropriate device.
Use the remote control to turn up the volume.
Check the monitor's or external audio system's
volume setting. Then check the system's audio
output using the Speaker Test under Diagnostics >
Audio. You should hear a 400 Hz tone.
Go to System > Admin Settings > Audio Settings
and select twice.
Make sure that Midrange Speaker and Subwoofer
Speaker are both On.
Ensure that each person who speaks is facing a
microphone and is close enough to it.
Ask the far site to check the cable to the microphone.
Try the call again later.
7 - 23