Pathnavigator Error Codes - Polycom VSX Series Administrator's Manual

Administrator's Guide for the VSX Series

PathNavigator Error Codes

Appendix - 16
The following table lists PathNavigator error codes.
Code Cause
150 No Network
Resources
151 No Network
Resources
152 Gatekeeper
Problems
153 Incorrect Address
154 Gatekeeper
Problems
155 Gatekeeper
Problems
156 Gatekeeper
Problems
157 Gatekeeper
Problems
158 Gatekeeper
Problems
159 System Not
Registered with
Gatekeeper
160 Far Site Not
Registered with
Gatekeeper
164 Far Site Busy
Description
The network does not have enough resources to
complete your call. Try calling at a lower rate, or
try the call again later.
The network does not have enough resources to
complete your call. Try calling at a lower rate, or
try the call again later.
Your call could not be completed because of an
internal error in the gatekeeper or endpoint.
Contact the gatekeeper or endpoint vendor for
assistance.
Your call could not be completed because of an
internal error in the gatekeeper or endpoint.
Contact the gatekeeper or endpoint vendor for
assistance.
Your call could not be completed because of an
internal error in the gatekeeper or endpoint.
Contact the gatekeeper or endpoint vendor for
assistance.
Your call could not be completed because of an
internal error in the gatekeeper or endpoint.
Contact the gatekeeper or endpoint vendor for
assistance.
Your call was rejected by the gatekeeper. Contact
your Network Administrator for assistance.
Your call could not be completed because of an
internal error in the gatekeeper or endpoint.
Contact the gatekeeper or endpoint vendor for
assistance.
Your call could not be completed due to
gatekeeper problems. Try the call again later.
Your system must be registered with the
gatekeeper before you can place a call. Contact
your Network Administrator for assistance.
The system you are trying to call is not registered
with the gatekeeper.
The system you called is busy. Try the call again
later.