Actions That Cause The System To Restart - Polycom VSX Series Administrator's Manual

Administrator's Guide for the VSX Series

Actions that Cause the System to Restart

Appendix - 10
The VSX system restarts in the following situations:
• Changing Monitor 1 configuration from non-VGA to VGA, or from VGA
to non-VGA. If the VSX system is connected to a single VGA monitor, you
must hold down the asterisk button on the remote control while the
system restarts.
• Changing any of the following settings in the LAN Properties screens:
— Connect to My LAN
— Host Name
— IP Address — Changing how the system obtains an IP address or
changing the address that you have entered manually
— DNS Servers
— Default Gateway
— Subnet Mask
— WINS Server
— LAN Speed
— Duplex Mode
• Changing any setting under Enable Remote Access, on the Security
screen:
— FTP
— Web
— Telnet
— SNMP
• Changing the Web Access Port on the Security screen
• Changing any setting on the SNMP screen:
— Enable SNMP
— Community
— Contact Name
— Location Name
— System Description
— Console IP Address
• Changing the Security Mode setting