Creating A Localized System Name With Vsx Web - Polycom VSX Series Administrator's Manual

Creating a Localized System Name with VSX Web

To view a room or call:
1. On a computer, open a web browser.
2. In the browser address line, enter the system's IP address, for example,
http://10.11.12.13, to go to VSX Web.
3. Go to Utilities > Web Director.
4. Perform any of the following tasks:
— Place or end a call
— View near and far sites
— Change camera sources
— Adjust camera position
— Zoom cameras
— Adjust system volume settings
— Mute and unmute the microphones
You can view near and far sites without opening Web Director by selecting
Tools > Remote Monitoring.
Localized system names are sent to the far site and displayed as the caller ID
by VSX systems using version 8.0 or later. When you enter a localized system
name, it is also entered in English/Pinyin. The English/Pinyin name is the
name used by the Global Directory Server, the gatekeeper, and other systems
that do not support this feature, and it is also the name that shows up in the
Recent Calls list.
To create a localized system name using VSX Web:
1. On a computer, open a web browser.
2. In the browser address line, enter the system's IP address, for example,
http://10.11.12.13, to go to VSX Web.
3. Go to Admin Settings > General Settings > System Settings.
4. Enter the localized system name in the appropriate language field.
Managing the System Remotely
5 - 3