Setting Date, Time, And Location - Polycom VSX Series Administrator's Manual

Setting Date, Time, and Location

You can update the system with regional settings, including the
location-specific language and calling parameters.
To set the date, time, and location:
1. Go to System > Admin Settings > General Settings > Location.
2. Configure these settings:
Setting Description
Country Specifies the country where the system is located.
Changing the country automatically adjusts the country code
associated with your system number.
Language Sets the language for the user interface.
Country Code Specifies the country code for the system location.
Area Code Specifies if an area code is required to place ISDN calls in
Required the specified country.
ISDN International Specifies the international code required for placing ISDN
Access calls from the system location to another country.
Room Telephone Indicates the telephone number of the room where the
Number system is located.
3. Select and configure these settings:
Setting Description
Date Format and Specifies your format preference for the date and time display
Time Format and lets you enter your local date and time.
Display Time in Specifies the time display in a call:
Call
•
•
•
Elapsed Time – Displays the amount of time in the call.
Local Time – Displays the local time on the screen during
a call.
Off – Time is not displayed.
Customizing the VSX System
4 - 45