Screens That Require The Room Password For Access; Letting Users Customize The Workspace - Polycom VSX Series Administrator's Manual

Admin Settings
General Settings Network
System Settings
Home Screen Settings
Security
Location
Serial Port*
IP
Options
ISDN*
V.35/RS-449/RS-530*
Telephony
Call Preference
Recent Calls

Screens that Require the Room Password for Access

The following illustration shows which screens require the room password.
Diagnostics** System Information
Monitors Cameras
Monitors
Graphics VGA*
Multipoint Setup
H.323 Settings
SIP Settings
Quality of Service
Firewall
Streaming
Password Protected

Letting Users Customize the Workspace

You can allow users to change common user preferences by providing access
to the User Settings screen.
To allow users to customize the workspace:
1. Go to System > Admin Settings > General Settings > Security.
2. Select the Allow Access to User Settings option to make the User
Settings button available to users on the System screen.
User Settings contains the following options, which are also available to
administrators on the Admin Settings screens:
• Backlight Compensation
• Camera Brightness (VSX 3000 or VSX 3000A)
• Far Control of Near Camera
• Meeting Password
• Auto-Answer Point to Point
Utilities
General Access
Audio LAN Properties
Customizing the VSX System
User Settings
Global Services
Directory Servers
Dialing Rules
SNMP
Management Servers
Account Validation
My Information
* May not be present for all system types
**Reset System is password-protected
when Security Mode is enabled
4 - 33