Appendix K: Parameter Descriptions; Identification; Operation Unit; 1.2. Configuration - Siemens SITRANS LR200 Instruction Manual

Appendix K: Parameter Descriptions

SITRANS LR 200 (PROFIBUS PA): parameter menus
The parameters are grouped in menus according to function. Submenus, arranged on
four levels, give access to associated features and options.
Some menus are accessible in PDM only via pull-down menus: in those cases, directions
are given beside the individual parameter.
Not all menus are accessible via the hand programmer. Menus that are accessible via the
hand programmer are preceded by a number (applicable only to the hand programmer).
Notes:
• For Quick Access to parameters via the hand programmer, press the mode key to
activate PROGRAM mode, then key in the menu number. (For more details, see
hand programmer
• Values shown in the tables below can be entered via the hand programmer.

1. Identification

Operation Unit

Tag
Text that can be used in any way, for example as a unique label for a field device
in the plant.
Description
Text that is associated with the Field Device. This text can be used by the user in
any way. There is no specific recommended use.
Message
Text that is associated with the FIeld Device. This text can be used by the user in
any way. There is no specific recommended use.

1.2. Configuration

1.2.1. Address (default 126)
The unique address of the device on the network (also called PROFIBUS address).
Values
Open the menu Device – Set Address.
1.2.2. Remote operation enable
Enables or disables programming via the network and PDM.
Values
7ML19985HP01 SITRANS LR 200 (PROFIBUS PA) – INSTRUCTION MANUAL
on page 17.)
0 - 126
0
Remote operation enabled
1
Remote operation disabled
The
Page 85