Rod Antenna Ansi Hole Pattern Flanges; Rod Antenna Dn Hole Pattern Flanges - Siemens SITRANS LR200 Instruction Manual

Rod Antenna ANSI Hole Pattern Flanges

process temperature (°C)
2"
4"

Rod Antenna DN Hole Pattern Flanges

50 mm
100 mm
WARNING: Never attempt to loosen, remove, or disassemble process
connection or instrument housing while vessel contents are under
pressure.
1.
UHMW-PE antennas are rated to a maximum of 80°C (176°F) of continuous duty.
2.
Customer to provide adequate bolting to retain vessel pressure and provide sufficient sealing.
7ML19985HP01 SITRANS LR 200 (PROFIBUS PA) – INSTRUCTION MANUAL
3"
6"
process temperature (°C)
80 mm
150 mm
1, 2
Process Configuration:
• 51003 with flange series 22452.
• Flange will be stamped 22452.
Process connection tag will
have the series identified as
51003.
• Reference drawing number is
shown on the process device
tag. You can find this drawing
on our website:
www.siemens.com/
processautomation, on the
LR 200 product page, under
Process Connection
Specifications.
1, 2,
Process Configuration:
• 51003 with flange series 22452.
• Flange will be stamped 22452.
Process connection tag will
have the series identified as
51003.
• Reference drawing number is
shown on the process device
tag. You can find this drawing
on our website:
www.siemens.com/
processautomation, on the
LR 200 product page, under
Process Connection
Specifications.
Page 39