Acyclic Data - Siemens SITRANS LR200 Instruction Manual

LCD
Meaning
display
The velocity calibration
for the device is
S:34
incorrect.
The device did not
S:35
initialize properly.
The receive calibration
S:36
is invalid.
Measurement hardware
S:37
problem.
Measurement hardware
S:38
problem.

Acyclic Data

SITRANS LR 200 supports up to four simultaneous connections by a Class 2 Master
(C2 connection). It supports one connection by a Class 1 Master (C1 connection). A list of
all acyclic data, including address (slot and index), format, range of values, start value,
and attributes, can be found at
page 75.
7ML19985HP01 SITRANS LR 200 (PROFIBUS PA) – INSTRUCTION MANUAL
Corrective Action
Return the device to the factory.
Cycle the power. This may
temporarily solve the problem. Do
not use the device for
measurement, but return it to the
factory as soon as possible.
Return the device to the factory.
Cycle the power. This may
temporarily solve the problem. Do
not use the device for
measurement, but return it to the
factory as soon as possible.
Cycle the power. This may
temporarily solve the problem. Do
not use the device for
measurement, but return it to the
factory as soon as possible.
Appendix J: Asynchronous Communications Data Map
Bit
Byte (cont
' d )
2
3
4
4
5
6
on
Page 31