Interface; Programmer (Infrared Keypad); Mechanical - Siemens SITRANS LR200 Instruction Manual

Programmer (infrared keypad)

Siemens Milltronics Infrared IS (Intrinsically Safe) Hand Programmer for hazardous and
all other locations (battery is non-replaceable).
• approval
• ambient temperature −20 to 40° C (−5 to 104° F)

• interface

• power
• weight
• color

Mechanical

Process Connections:
• threaded connection 1.5" NPT, BSP , or 'G' (ISO 228) Series (polypropylene rod
• flange connection
Antenna:
• polypropylene rod
• PTFE rod
• horns/waveguide
Notes:
• Please check the ambient and operating temperatures under
Process
and
page 9, for the specific configuration you are about to use or install.
• The use of approved watertight conduit hubs/glands is required for Type 4X /
NEMA 4X, Type 6 / NEMA 6, IP67, IP68 (outdoor applications).
7ML19985HP01 SITRANS LR 200 (PROFIBUS PA) – INSTRUCTION MANUAL
ATEX II 1 G, EEx ia IIC T4, certificate SIRA 01ATEX2147
FM/CSA: Class I, Div. 1, Groups A, B, C, D
proprietary infrared pulse signal
3 V lithium battery
150 g (0.3 lb)
black
antenna)
2" NPT, BSP , 'G' (ISO 228) Series (stainless steel connection,
PTFE antenna)
See table on page 52
hermetically sealed construction
standard 100 mm (4") shield for maximum 100 mm (4") nozzle,
or optional 250 mm (10") long shield
Appendix D: Flange Adapter Versions
see
Appendix D: Flange Adapter Versions
see
on page 8; also check
Approvals (verify against device nameplate)
, page 44 onwards
, page 44 onwards
Enclosure:
on page 8,
on
Page 7