Appendix A: Parameter Descriptions; Identification; Operation Unit; Configuration - Siemens Sitrans LR 460 Instruction Manual

Appendix A: Parameter Descriptions

SITRANS LR 460: parameter menus
The parameters are grouped in menus according to function. Submenus, arranged on
four levels, give access to associated features and options.
Some menus are accessible in PDM only via pull-down menus: in those cases, directions
are given beside the individual parameter.
Not all menus are accessible via the handheld programmer. Menus that are accessible
via the handheld programmer are preceded by a number applicable only to the handheld
programmer.
Notes:
• For Quick Access to parameters via the handheld programmer, press the mode key
to activate PROGRAM mode, then key in the menu number. (For more details, see
The handheld programmer
• Values shown in the tables below can be entered via the handheld programmer.

1. Identification

Operation Unit

Tag
Text that can be used in any way, for example as a unique label for a field device
in the plant.
Description
Text that is associated with the Field Device. This text can be used by the user in
any way. There is no specific recommended use.
Message
Text that is associated with the Field Device. This text can be used by the user in
any way. There is no specific recommended use.

1.2. Configuration

1.2.2. Address (default 126)
The unique address of the device on the network (called PROFIBUS address in
PROFIBUS devices).
Values
Open the menu Device – Set Address (only in PROFIBUS PA).
1.2.3. Remote operation enable
Enables or disables programming via the network and PDM.
Values
7ML19985JM01
on page 25.)
0 - 126
0
Remote operation enabled
1
Remote operation disabled
SITRANS LR 460 – INSTRUCTION MANUAL Page 58