Specifications; Sitrans Lr 200 (Profibus Pa); Power; Performance - Siemens SITRANS LR200 Instruction Manual

Specifications

Notes:
• Siemens Milltronics makes every attempt to ensure the accuracy of these
specifications but reserves the right to change them at any time.

SITRANS LR 200 (PROFIBUS PA)

Power

Bus powered
Current consumed
1

Performance

• frequency
• measurement range
• blanking distance
• accuracy
• influence of ambient temperature 0.006% / K
• repeatability
• dielectric constant
• update time
• memory
Interface
• PROFIBUS PA
• configuration
• display (local)
1.
Reference conditions.
2.
For details, please see
SITRANS LR 200 Dimensions
Versions
, page 44 onwards.
Page 6 SITRANS LR 200 (PROFIBUS PA) – INSTRUCTION MANUAL
On PROFIBUS PA, as per IEC 61158-2
10.5 mA (General Purpose or Intrinsically Safe
version)
5.8 GHz (6.3 GHz in N. America): refer to product
nameplate for confirmation
0.3 to 20 m (1 ft to 65 ft)
2
0.3 m (1 ft), plus the shield length (if any)
± the greater of: 0.1% of range, or 10 mm (0.4")
±5 mm (0.2")
ε > 3 (for < 3 use waveguide antenna or
r
stillpipe)
1 second
non-volatile EEPROM, no battery required.
Siemens SIMATIC PDM (PC), or
Siemens Milltronics infrared hand-held programmer
multi-segment alphanumeric liquid crystal with bar graph
(representing level)
Near Range (Blanking)
on page 13 for the standard version, or
on page 35. For reference points, please see
Appendix D: Flange Adapter
7ML19985HP01