Macro Control Overview - Native Instruments MASCHINE MK3 Getting Started

The Macro properties (here for a Sound) in the software.
You can access the Macro properties and adjust their Macro Controls via the usual pro-
cedure common to all Channel properties and Plug-in parameters. For detailed instruc-
tions, e.g., see ↑6.5, Accessing the Plug-in
11.2.1

Macro Control Overview

Each Macro Control can be assigned to one target parameter with the full range of the selected
parameter. On the other hand, the same parameter can be the target of more than one Macro
Control.
To know which parameters you can assign to a Macro Control, consider this single rule:
A Macro Control of a channel can control any properties or Plug-in parameters of that channel or of
any underlying channel.
In other words:
▪ For Sounds: You can assign the Macro Controls of a Sound to any parameters in its Chan-
nel properties or Plug-ins.
▪ For Groups: You can assign the Macro Controls of a Group to any parameters in its Channel
properties or Plug-ins as well as any parameters in any Sound inside the Group.
▪ For the Master: You can assign the Macro Controls to any parameters found in the Channel
properties or Plug-ins of any channel in your Project.
The Macro properties (even of a different channel) are not available as targets for any
Macro Control.
Parameters.
Using Advanced Features
Using Macro Controls
MASCHINE - Getting Started - 155