2.
Plug the 1/4" TRS jack of your headphones into the
3.
Start the playback of a Project in MASCHINE or an audio file on your computer.
4.
Gradually turn the
comfortable listening level.
The headphones output of your MASCHINE controller is an additional stereo output, dis-
tinct from the main output pair, and perfectly tailored for the Cue channel of MA-
SCHINE. You cannot use it to monitor the main outputs in your headphones. For more
details, please read the following Knowledge Base article on the Native Instruments
website:
https://support.native-instruments.com/hc/en-us/articles/115005070825-Important-
Notes-on-MASCHINE-MK3-s-Audio-Interface.
2.3.3
MASCHINE in a Recording Setup
The following instructions will assist you in using the MASCHINE controller in a recording sit-
uation for capturing audio to MASCHINE — for example, for recording samples or process a
live input during a performance.
PHONES VOLUME
knob on the MASCHINE controller until you reach a
PHONES
socket nearby.
MASCHINE - Getting Started - 26
Setting Up MASCHINE
Setup Examples