Managing Scenes - Native Instruments MASCHINE MK3 Getting Started

3. While holding SCENE
Pad 2 lights up brightly to confirm its selection.
Pad 1 turns half lit, indicating that Scene 1 is not currently selected.
4. Release the SCENE
Scene 2 is now selected. If the sequencer is playing, you won't hear anything because
→
this Scene is still empty.
Now we can select one Pattern in each Group to include in this new Scene:
1. Press the desired Group button
2. Press PATTERN + the desired pad to select the Pattern you want to use in Scene 2.
A Pattern has now been selected for Scene 2. By repeating these two steps for all Groups
→
you want to use in this Scene, you progressively build up a new Scene.
You might also want to remove a Pattern from the selected Scene:
To remove a Pattern for the selected Group from the selected Scene, press
►
Button 2 (REMOVE).
The Pattern is removed from the Scene. You will note that the corresponding Pattern is
→
still there.
Don't forget that you can at any time press
9.3

Managing Scenes

Now that we have created a few Scenes of interest, we want to organize them to make it easier
to arrange them into a song when we add them later to the Arranger. For this, the Ideas view
provides you with many editing facilities. Let's introduce the most important ones.
(Section), press pad 2
(Section) button.
A–H to select a Group you want to use in Scene 2.
UNDO
to select Scene 2.
or REDO to undo/redo your actions.
MASCHINE - Getting Started - 134
Creating Scenes
Managing Scenes
PATTERN +