2.
Press the
SCENE
(Section) button to enter the Section page.
3.
Press Button 1 to pin the page if required.
4.
Select the pad representing the Section you want to adjust.
5.
Turn Knob 4 to adjust the length of the Section as required. Turning the Knob left will
shorten the Section, turning it right will lengthen the Section.
6.
Press
SHIFT
and turn Knob 4 to change the Section length in smaller increments.
The Section length is adjusted accordingly.
→
10.2.2
Duplicating and Removing Sections
MASCHINE offers you various editing tools for Section slots. Here are some examples using
your controller and a few more using the MASCHINE software.
10.2.2.1 Duplicating and Removing Sections in the MASCHINE Software
To duplicate a Section in the Arranger:
Right-click for example the Section slot 2 and click Duplicate in the context menu.
►
The content of Section slot 2 is copied to the next Section column and all other Sections
→
are moved one Section to the right.
To remove a Section in the Arranger:
Creating an Arrangement
Managing Sections
MASCHINE - Getting Started - 148