Connecting A Dynamic Microphone - Native Instruments MASCHINE MK3 Getting Started

You will find two examples using a recording setup with step-by-step instructions on how
to route external audio to a particular Sound of your MASCHINE Project in section
↑11.3.2, Using an External Sound Source
You can use the described setups with MASCHINE as well as with any other music soft-
ware running on your computer. For the audio device configuration required on the soft-
ware side, see ↑2.2.1, Using Your Controller as Audio Device in the MASCHINE Soft-
ware or ↑2.2.2, Selecting the MASCHINE Controller as Audio Device in Other Music
Software, respectively.
2.3.3.1

Connecting a Dynamic Microphone

This example shows a setup with both a pair of active speakers (see
Monitor Speakers) and a pair of headphones (see
tra dynamic microphone, e.g., for working with voice.
MASCHINE setup with a dynamic microphone.
and ↑11.4.1, How to Sample.
↑2.3.2, Connecting
Setting Up MASCHINE
↑2.3.1, Connecting Active
Headphones) with an ex-
MASCHINE - Getting Started - 27
Setup Examples