⇨
A list of Groups appears on the right display:
4.
Check that Button 4 above the displays is not fully lit and that the
neath is not highlighted; if necessary, press Button 4 to disable it.
⇨
This will now allow you to select only Native Instruments factory content.
5.
Move the 4-D encoder to the left or to the right in order to put the focus (indicated by the
brackets) on
All
Types.
6.
Press and hold the 4-D encoder to view which Group types are available.
⇨
The right display shows the various types of Groups available (Kits, Loops,
long as the 4-D encoder is pressed:
7.
While holding the 4-D encoder, turn it to select Kits.
⇨
When you release the encoder, the right display shows the list of Groups again, but now
this list contains only drum kits. Note that you can also turn the 4-D encoder without
holding it to select the desired entry (the available types of Groups will not be displayed).
Loading a Drum Kit from the Factory Library
USER
label under-
Multi
FX) as
MASCHINE - Getting Started - 37
First Steps