2.
Click the desired Patterns for Scene 2.
The selected Patterns will play when Scene 2 is selected.
By repeating these two steps for all Groups you want to use in this Scene, you progressive-
→
ly build up a new Scene.
You might also want to remove a Pattern from a Scene:
To remove a Pattern from a Scene, simply click it.
►
The Pattern is removed from the Scene. You will note that the corresponding Pattern has
→
only been dimmed and not deleted. You can click the Pattern again to reselect it for the
Scene.
9.2.2
Creating other Scenes using the Controller
Let's select the second Scene:
1.
Press
SHIFT
+
SCENE
2.
Press and hold the
The pads now represent available Scenes. For the moment only pad
that Scene slot 1 is selected and all other slots are empty.
(Section) to enter Ideas view.
SCENE
(Section) button.
Creating Scenes
Assigning Patterns to Scenes
1
is lit: This indicates
MASCHINE - Getting Started - 133