Native Instruments MASCHINE MK3 Getting Started page 56

Selecting Another Snare Sample on the Controller
On your controller, do the following:
1. Press BROWSER to open the Browser.
2. Press pad 6 to select its Sound.
3. Press Button 2 above the displays repeatedly until
⇨
By selecting this, a list of Samples will become visible on the right display.
4. Check that Button 4 above the displays is not fully lit and that the
neath is not highlighted; if necessary, press Button 4 to disable it.
⇨
This will select only Native Instruments factory content:
5. Move the 4-D encoder to the left or to the right in order to put the focus (indicated by the
brackets) on All Types, then turn the encoder to select the
the results to the drum Samples:
You can also press and hold the 4-D encoder to temporarily display all available types; you
can even turn the encoder while pressing it to see where your selection currently is.
SAMPLES is selected.
USER
Drums type, thereby limiting
MASCHINE - Getting Started - 56
Building Your Own Drum Kit
Customizing Your Drum Kit
label under-