Native Instruments MASCHINE MK3 Getting Started page 80

In the timeline of the Pattern Editor, click the right limit of the Pattern (indicated by a
►
little triangle pointing to the left) and drag your mouse horizontally in the timeline to
change the Pattern Length.
At the top right of the Pattern Editor, click the value and drag your mouse vertically to
►
change the Pattern Length.
5.2.2.2 Adjusting the Pattern Length on the Controller
1. Hold PATTERN.
At the bottom of the left display, you see that the
set to 1:0:0, which means one bar:
2. While holding PATTERN, turn Knob 4 to set a new value for the Pattern Length.
The empty Pattern in Pattern slot 2 now has a new length, as you can see in the soft-
ware's Pattern Editor.
Pattern LENGTH parameter is currently
MASCHINE - Getting Started - 80
Creating Beats
Adding a Second Pattern