Native Instruments MASCHINE MK3 Getting Started page 169

5. Click Close to exit the
6. Plug your external sound source into the audio input sockets on the rear panel of your
controller: E.g., you could plug a dynamic microphone into the
put of a hardware synthesizer into the
In the steps above, we assumed that your MASCHINE software is configured for use with
the integrated audio interface available on your MASCHINE MK3 controller (this is the
case by default). Of course, you can follow the same procedure with any other audio in-
terface — just make sure that it is selected in the
Preferences dialog.
Step 2: Make a Sound in your Project listen to your external audio source
1. Now click the Group
2. Click the Sound slot
3. At the far left of the Control area, click the Channel icon (showing a little rotary knob) to
display the Channel properties.
4. Click Input on the left-hand side.
Preferences dialog.
LINE IN 1
D in the Arranger to select it.
1 in the Pattern Editor to select it.
MIC IN
and 2 sockets.
Device menu of the Audio page in the
MASCHINE - Getting Started - 169
Using Advanced Features
Using Other Sound Sources
socket, or the out-