⇨
By selecting this, a list of Projects will become visible on the right display.
3.
Press Button 4 above the displays to enable it.
⇨
The
USER
label underneath gets highlighted:
This will select only User content.
4.
If you have already created more than one Project, turn the 4-D encoder or Knob 8 until
My First Project
is selected on the right display.
5.
Press the 4-D encoder or Button 8 to load the Project.
6.
Press
BROWSER
to leave the Browser.
The
BROWSER
button turns off.
You can continue to work on your tutorial Project.
→
You will note that every action you did on the controller is directly mirrored in the
Browser of the MASCHINE software. This is true in both directions.
Opening a Recent Project Using the Controller
Your MASCHINE controller also provides a handy way to open Projects on which you worked
recently:
1.
Press
FILE
to open the File mode.
The right display shows a list of your recent Projects.
2.
Turn the 4-D encoder or Knob 8 to select the desired Project from the list.
3.
Press the 4-D encoder or Button 8 to load the selected Project.
Building Your Own Drum Kit
Opening Your Project
MASCHINE - Getting Started - 52