Native Instruments MASCHINE MK3 Getting Started page 190

1 2
3 4
5 6
7
8 9
10 11
The Control section on your controller.
(1) CHANNEL button: Press
controller) and directly display the Channel properties of the selected Sound/Group or the Mas-
ter. This provides instant access to all Channel properties' parameters via the eight Buttons
and eight Knobs above and under the displays.
For a quick introduction to Channel properties, see
and Master Channel
Press SHIFT + CHANNEL
you to use MASCHINE as a MIDI controller (for more information on this, please refer to the
Controller Editor Manual).
(2) PLUG-IN button: Press
troller) and directly display the Plug-in(s) loaded in the selected Sound/Group or the Master.
This provides instant access to all Plug-ins' parameters via the eight Buttons and eight Knobs
above and under the displays. See
SHIFT + PLUG-IN (Instance) to enter Instance mode. In this mode you can select which in-
stance of the MASCHINE plug-in you want to control from your hardware controller if you have
more than one instance open in your host.
CHANNEL to switch to Control mode (the default mode on your
Properties.
(MIDI) to switch your controller to MIDI mode. This mode will enable
PLUG-IN to switch to Control mode (the default mode on your con-
↑7.2, Playing with Effects
12
13
14
↑11.1, Changing the Sound, Group,
for a practical example. Press
MASCHINE - Getting Started - 190
Quick Reference
MASCHINE Hardware Overview