Native Instruments MASCHINE MK3 Getting Started page 57

6. Move the 4-D encoder one step to the right to put the focus (the brackets) on the
Types label that just appeared, and turn (or press and turn) the encoder to select the
Snare sub-type.
⇨
By doing this you further limit the results to the snare drum Samples:
7. Move the 4-D encoder one more step to the right to put the focus on the new
Types label that just appeared, and turn (or press & turn) the encoder to select the
Stick sub-type.
⇨
On the right display, you now see the side stick Samples ready to be browsed:
8. Move the 4-D encoder another step to the right to put the focus on the
9. Press and hold SHIFT
10. Turn the 4-D encoder to scroll through all side stick Samples.
⇨
You can hear each Sample that you select thanks to the enabled Prehear feature.
11. Once you have found a suitable side stick Sample, press the 4-D encoder to load it into
the Sound slot currently selected (the one triggered by pad 6).
+ Button 8 to activate PREHEAR.
Building Your Own Drum Kit
Customizing Your Drum Kit
All Sub-
All Sub-
Side
Results list.
MASCHINE - Getting Started - 57