Tracing Signals - Siemens SINAMICS V90 Operating Manual

4.5.2

Tracing signals

With this function, you can trace the performance of the connected drive in the current
control mode on the following panel:
Area
①
②
SINAMICS V-ASSISTANT Online Help
Operating Manual, 04/2017, A5E36618042-003
Item
Trace configu-
ration
Start/stop trace
(Only available
in online mode)
Cursors
Description
Opens the window of trace configuration
For more information, see Section "Trace configuration
(Page 126)".
Starts recording the current trace
If you desire to stop the trace process, click the following
button:
Changes the cursor shape from cross to arrow
When the cursor appears as an arrow, you can directly
select a curve and use it for variable calculation.
Note:
The selected curve is displayed highlighted.
If you click this button, you can move the selected curve
freely after the cursor appears in the shape of a hand.
Task navigation
123