Siemens SINAMICS V90 Operating Manual page 64

Task navigation
If you desire to configure the task settings of the traversing block, you can click
Click
mode, continuation condition as well as IDs and then close the window.
● EPOS Jog
Enter the desired traversing distance and velocity setpoint for Jog 1 or Jog 2 in the above
window.
● MDI Positioning
Enter the desired MDI position, MDI velocity, MDI acceleration override and MDI
deceleration override of the fixed setpoint. Click
MDI positioning type and absolute positioning direction. Select your desired settings and
close the windows.
64
to open the following window:
to expand the drop-down lists. Select your desired type of 2621, positioning
to expand the drop-down lists of the
SINAMICS V-ASSISTANT Online Help
Operating Manual, 04/2017, A5E36618042-003