Configuring Network - Siemens SINAMICS V90 Operating Manual

4.2.2

Configuring network

This function is only available in online mode. You can configure this function on the
following panel:
In online mode, the IP address of the connected drive is displayed in area "
You can define the PN name of station in area "
lowercase letters ("a" to "z") and characters ("-" and ".") in English are permissible. In
addition, you can modify the IP address in area "
and activate the settings. Restart the drive and then the PN name and IP address you set
become active and appear in areas "
Note
If you have also configured the IP protocol in TIA portal, then the IP protocol set in TIA portal
takes the first priority and displays in area "
SINAMICS V-ASSISTANT Online Help
Operating Manual, 04/2017, A5E36618042-003
①
". Note that only numbers (0 to 9),
②
" as desired. Click button "
④ ⑤
" and " ".
⑤
" as the actual active IP protocol.
Task navigation
②
" automatically.
③
" to save
51