Tracing Signals - Siemens SINAMICS V90 Operating Manual

4.4.2

Tracing signals

With this function, you can trace the performance of the connected drive in the current
control mode on the following panel:
Area
①
②
SINAMICS V-ASSISTANT Online Help
Operating Manual, 02/2015, A5E32187373-003
Item
Trace configu-
ration
Start/stop trace
(Only available
in online mode)
Cursors
Description
Opens the window of trace configuration. For more infor-
mation, refer to "Trace configuration (Page 94)".
Starts recording the current trace.
If you desire to stop the trace process, click the following
button:
By default, the cursor displays as a cross in the chart.
You can select an area of the chart for detailed view by
left-clicking and holding your mouse.
Changes the cursor shape from cross to arrow.
When the cursor displays as an arrow, you can directly
select a curve and use it for variable calculation.
Note:
The selected curve displays highlighted.
If you click this button, you can move the selected curve
freely after the cursor appears in the shape of a hand.
Task navigation
4.4 Diagnostics
91