Wireless Antennas - Toshiba QOSMIO E10 Maintenance Manual

4.23 Wireless antennas/ LCD harness
3. Peel off the glass tapes fixing the wireless LAN antenna cables and bluetooth antenna
cable and peel off the wireless LAN antennas and bluetooth antenna from the display
cover.
Installing the wireless antennas
The following describes the procedure for installing the wireless LAN antenna (See Figure
4-40 and 4-41).
1. Stick the wireless LAN antennas and bluetooth antenna on the display cover.
2. Arrange the wireless LAN antenna cables along the guide of middle frame.
3. Arrange the bluetooth antenna cable along the guide of middle frame and fix it with
the insulators.
4. Arrange the wireless LAN antenna cables and blutooth antenna cable on the
display cover and fix it with the glass tapes.
QOSMIO E10 Maintenance Manual (960-492)
Glass tape
Figure 4-41 Removing the wireless antennas
4 Replacement Procedures
Glass tape
Wireless LAN antenna
with black cable
Bluetooth antenna
Wireless LAN antenna
with white cable
4-63