Toshiba QOSMIO E10 Maintenance Manual page 274

4 Replacement Procedures
Installing the LCD harness
The following describes the procedure for installing the LCD harness (See Figure 4-42 and 4-
43).
1. Arrange the LCD harness to the guide.
2. Attach the LCD harness holder (middle frame side) and secure it with the
following screw.
• M2.5×4B
3. Attach the LCD harness holder (display cover side) and secure it with the following
screw.
• M2.5×4B
4-66
4.23 Wireless antennas/ LCD harness
FLAT BIND screw
FLAT BIND screw
QOSMIO E10 Maintenance Manual (960-492)
x1
x1