Cpu Fan/Cpu Heat Sink/Cpu - Toshiba QOSMIO F30 Series Maintenance Manual

4.27 CPU fan/CPU heat sink/CPU

4.27 CPU fan/CPU heat sink/CPU

Removing the CPU fan/CPU heat sink/CPU
The following describes the procedure for removing the CPU fan/CPU heat sink/CPU (See
Figure 4-41 to 4-43).
1. Remove the following screws securing the CPU holder.
• M2.0×4B
NOTE: When removing the CPU holder, be sure to remove the screws in the reverse
order of the number marked on the holder.
2. Remove the CPU holder.
3. Disconnect the CPU fan cable from the connector CN8771 on the system board and
remove the CPU heat sink and CPU fan from the slot.
M2.0x4B BIND
Figure 4-41 Removing the CPU heat sink and CPU fan
QOSMIO F30 Maintenance Manual (960-555)
BIND screw
CPU holder
4 Replacement Procedures
×3
CPU heat sink and CPU fan
CPU fan cable
[CONFIDENTIAL]
CN8771
4-61