Toshiba QOSMIO E10 Maintenance Manual page 154

3 Tests and Diagnostics
Subtest 03 Kill Switch test
This subtest checks if the Wireless LAN KILL switch works properly.
If the test is started with the KILL switch ON, following message appears in
the display.
Slide the KILL switch to the OFF position. Then, following message appears in the
display.
Slide the KILL switch to the ON position. Then, following message appears in the
display.
After Sliding the KILL switch to the OFF position, return to the ONLY ONE TEST
menu automatically.
Subtest 04 Touch Pad (scroll Button)
This subtest checks if scroll button works properly.
The following message appears in the display.
Check the OFF message changes to ON while pressing UP or DOWN button.
Press Enter and return to ONLY ONE TESST menu.
3-42
Kill switch is set to a start position (OFF)
KILL SWITCH ON !!
KILL SWITCH OFF !!
****** Scroll button TEST (VX.XX) ******
Press Scroll button
Up Button OFF
Down Button OFF
Press [ESC] key to EXIT
3.20 ONLY ONE TEST
QOSMIO E10 Maintenance Manual (960-492)