Battery Pack/Pc Card/Bridge Media; Battery Pack - Toshiba QOSMIO E10 Maintenance Manual

4 Replacement Procedures
4.2

Battery pack/PC card/Bridge Media

4.2.1 Battery pack

Removing the battery pack
The following describes the procedure for removing the battery pack (See Figure 4-1).
CAUTION: Take care not to short circuit the terminals when removing the battery pack.
Similarly, do not drop, knock, scratch, disassemble, twist, or bend the battery
pack.
1. Turn off the power of the computer.
2. Disconnect the AC adapter and all other external devices from the computer.
3. Turn the computer upside down.
4. Release the battery lock.
5. Slide the battery latch to the arrow direction and pull up the battery.
6. Release the hook of the battery cover and remove the battery pack from the battery
cover.
Battery pack
4-8
Battery cover
Figure 4-1 Removing the battery pack
4.2 Battery pack/PC card/Bridge Media
Battery lock
Hook
QOSMIO E10 Maintenance Manual (960-492)
Battery latch