Memory Module - Toshiba QOSMIO E10 Maintenance Manual

4.4 Memory module

4.4 Memory module
CAUTION: The power of the computer must be turned off when you remove the memory
module. Removing a memory module with the power on risks damaging the
module or the computer itself.
Do not touch the memory module terminals. Any dirt on the terminals may
cause memory access problems.
Never press hard or bend the memory module.
Removing the memory module
To remove a memory module, confirm that the computer is in boot mode. Then perform the
following procedure (See Figure 4-6).
1. Loose the screw fixing the memory slot cover.
2. Remove the memory slot cover.
3. Open the left and right latches and remove the memory module.
Memory slot cover
Memory module
QOSMIO E10 Maintenance Manual (960-492)
Figure 4-6 Removing the memory module
4 Replacement Procedures
Screw
Latches
4-15